First samples of CSUNs new high efficient QSAR II module pass Chemitox PID test

October 15, 2013

NANJING, China and FRANKFURT, Germany, September 26th 2013 - CSUN, a specialized manufacturer of solar cells and modules is announces that first samples of its new high efficient QSAR II modules were successfully tested according to the Chemitox PID (potential-induced degradation) standards.

NANJING, China and Frankfurt, Germany, September 26th 2013 - CSUN, a specialized manufacturer of solar cells and modules is announces that first samples of its new high efficient QSAR II modules were successfully tested according to the Chemitox PID (potential-induced degradation) standards.

Chemitox is an independent testing laboratory headquartered in Tokyo, Japan, and an important institution for securing PV module quality employed on the growing Japanese market.

While the industry is still trying to fully understand the PID phenomenon, CSUN has started a comprehensive testing cycle to determine and enhance the quality of its product portfolio.

As the IEC 62804 “System voltage durability test for crystalline silicon modules” is under discussion, CSUN has classified the test conditions according to its severity in four grades:

 

  • Severity I with test conditions of 25°C / -1000V / 168 hours and the module surface covered by aluminum foil – the so-called TÜV Rheinland standard
  • Severity II with test conditions of 60°C / 85% RH (relative humidity) / -1000V / 96 hours  - the so-called TÜV Süd Standard on which also the IEC 62804 is based
  • Severity III with test conditions of 85°C / 85% RH / -1000V / 48 hours – the so-called PI Berlin standard
  • Severity IV with test conditions of 60°C / 85% RH / -1000V / 96 hours and the module front surface immersed in water – the so-called Chemitox standard

Initial test of CSUNs high efficiency QSAR II modules show that this module type has the potential to not only fulfill the IEC 62804 standard but can withstand harshest PID test conditions as simulated by the Chemitox laboratory standards. While first tests at the Chemitox labs showed power loss results between 4.3% and    6.6% more severe in-house testing is still ongoing, showing similar results as the Chemitox data.

The CSUN research and development team is taking these promising results forward to further improve the long-term durability of CSUN’s high efficiency QSAR II modules, highlighting CSUNs tireless pursuit of product quality.

 

About CSUN (China Sunergy Co., Ltd.)
CSUN designs, manufactures and delivers high efficiency solar cells and modules to the world from its production centers based in Turkey and China. CSUN also invests in high potential solar projects. Founded in 2004, CSUN is well known for its advanced solar cell technology, reliable product quality, and excellent customer service. For additional information, please visit http://www.csun-solar.com

Media Contacts:
Andrea Bodenhagen                  
CSUN Europe GmbH                              
Tel.: +49-69-96869767                          
Mobile: +49-176-70797328                              
Andrea.bodenhagen@csun-solar.com